Application fields and typical scenarios

Metal Corrugated Plate Structured Packing Chemical And Petrochemical

Distillation tower: used for the purification of low-carbon alcohols such as methanol and ethanol, with a separation efficiency of more than 30% higher than that of plate towers.

Absorption tower: in natural gas desulfurization and CO₂capture, high-efficiency gas-liquid contact is achieved, and the pressure drop is reduced by 40%.

Extraction tower: for processing high-viscosity materials (such as polymer solutions), with outstanding anti-clogging performance.

Metal Corrugated Plate Structured Packing Environmental Protection And Energy

Desulfurization tower: in flue gas desulfurization in coal-fired power plants, it has a large specific surface area and a desulfurization efficiency of more than 95%.

Oil-water separation: used for three-phase separators, with large flux and high separation efficiency.

Metal Corrugated Plate Structured Packing Pharmaceutical And Food

Antibiotic purification: resistant to high-temperature steam sterilization, in line with GMP standards.

Juice concentration: corrosion resistance meets food-grade hygiene requirements.

metal corrugated plate structured packing  Selection and installation guide

Key selection parameters

Processing capacity: select the model according to the tower diameter (such as Φ150mm-Φ12000mm).

Operating conditions: pressure (negative pressure to 10MPa), temperature (-200℃ to 800℃), medium corrosiveness (pH value 0-14).

Packing height: single plate height 50-200mm, total height calculated according to separation requirements.

Installation specifications

Small tower diameter (<800mm): whole plate filling, tighten to prevent deformation.

Large tower diameter: block splicing, upper and lower corrugations rotated 90°, anti-wall flow ring designed close to the tower wall.

Welding requirements: arc welding is used between packing blocks to ensure structural strength.