一、Metal Super Intalox Saddle Product Features

1.Composite structure design

Saddle and ring fusion: Combining the fluid distribution advantages of saddle packing and the strength characteristics of ring packing, annular ribs are added on the basis of saddle to avoid overlap and ensure structural stability.

Enhanced mass transfer design: small claws are stamped on the surface to increase gas-liquid agitation and improve mass transfer efficiency. Opening design (such as inner tongue) further promotes fluid mixing.

2.Material diversity

Corrosion-resistant materials: 304/304L/316/316L stainless steel, carbon steel and other options are available to adapt to acidic, alkaline and high temperature environments.

Special material expansion: such as duplex steel (2205) and titanium alloy to meet harsh working conditions such as chloride ion corrosion.

3.Key performance parameters

Specific surface area: 89.58-170.55 m²/m³, providing an efficient mass transfer interface.

Void ratio: ≥96%, ensuring low pressure drop and high flux.

Dry packing factor: as low as 58 m⁻¹, optimizing fluid distribution.

二、Metal Super Intalox Saddle Application areas

1.Petrochemical distillation

Decompression distillation of crude oil: reduce tower height by 35%, reduce pressure loss by 20-60%, and improve processing capacity.

Separation of olefins and isomers: achieve efficient separation under high vacuum conditions, and the product purity reaches 99.9%.

2.Environmental protection and water treatment

Treatment of phenol-containing wastewater: improve extraction efficiency and reduce COD by enhancing mass transfer.

Acetone recovery tower: combined with high-throughput design, efficient solvent recovery is achieved.

3.Multi-industry versatility

Chlor-alkali industry: resistant to Cl⁻corrosion and extend the life of packing.

Power industry: used in desulfurization towers to reduce SO₂emissions.